Skip to main content

PIGMENT™ | Q-SWITCHED ND:YAG

Tattoo Removal, Pigment & Skin Rejuvenation Laser for professional

PIGMENT™ delivers high-peak, ultra-short nanosecond pulses that target unwanted ink and pigment with precision — fragmenting the target while preserving the surrounding skin. One platform, four treatments, one investment.

fractional-co2-by-corpoderm-renace

Two wavelengths, one platform

Dual Wavelength

532 & 1064nm

Up to 800 mJ

High peak energy

≤ 6 nanosecond

Ultra-short pulse

532 nm wavelength

  • Removal of light-ink tattoos — red, sky blue, green, purple, and orange
  • Benign epidermal pigmented lesions

1064 nm wavelength

  • Removal of dark-ink tattoos — black, blue, and brown
  • Benign dermal pigmented lesions
  • Hollywood Peel (Carbon Peel)

How does it work?

PIGMENT™ is built around a simple physical principle: deliver energy that the target absorbs strongly and the surrounding skin largely ignores. The laser emits ultra-short, high-peak pulses tuned to wavelengths that ink and pigment absorb far more readily than healthy tissue. Because each pulse lasts only nanoseconds, the energy arrives faster than heat can spread to neighbouring cells — so the target takes the full impact while the skin around it is spared.

When a pulse strikes concentrated pigment, that sudden burst creates a rapid photoacoustic (pressure) effect that fractures the particle into microscopic fragments. The fragments are small enough for the body's own immune system to carry away over the following weeks — which is why results build gradually across a course of sessions rather than appearing all at once.

A flat-top beam profile spreads each pulse evenly across the spot rather than peaking in the centre, helping deliver uniform, predictable energy across the treatment area.

____

Matching the mechanism to the treatment

  • For tattoo removal, repeated sessions progressively fragment and fade unwanted ink, with the wavelength chosen to suit the ink colour.
  • For benign pigmented lesions, the same selective absorption breaks up excess melanin so the mark lightens

Throughout, the goal is the same: deliver precisely enough energy to act on the target while helping preserve the surrounding skin.

Two Working Modes

Q-Switched High-peak, ultra-short pulses interact with unwanted pigment to support effective tattoo and pigment-focused treatments.

SPT Gradual energy delivery provides smooth, controlled skin-toning and overall skin-quality enhancement.

In Q-Switched mode, all the energy is dumped in roughly 6 nanoseconds. Cramming energy into such a tiny window produces an enormous peak power — the tall spike. That sudden, violent burst creates a photoacoustic (pressure) effect that physically shatters tattoo ink and pigment into tiny fragments the body clears away. The total energy is modest, but the intensity per instant is huge.

In SPT mode, the same kind of energy is released gradually over about 300 microseconds — roughly 50,000 times longer. Spread out like that, the peak power is far lower (the short, wide block), so instead of shattering anything it gently heats the tissue. That controlled warming is what stimulates collagen and is used for skin toning and rejuvenation.

Optional Handles

585 NM DYE HP

20000 shots | Blue tattoo

Size: Ø 31.5 × 186mm

Parameters: input 532nm, output 585nm

Conversion efficiency: 60-70%

Spot size: input 12-15mm, output 2-3mm

Lifetime: 20000 shots

Special attention:

The input spot must be 532nm

Spot energy density ≤ 0.5J/cm2

Pulse width: 8-10ns

Working frequency: 1-2Hz

650 NM DYE HP

20000 Shot | Green tattoo

Size: Ø 31.5 × 186mm

Parameters: input 532nm, output 650nm

Conversion efficiency: 40-50%

Spot size: input 12-15mm, output 2-3mm

Lifetime: 20000 shots

Special attention:

The input spot must be 532nm

Spot energy density ≤ 0.5J/cm2

Pulse width: 8-10ns

Working frequency: 1-2Hz

FLA HP

532 nm / 1064 nm (Single wavelength use)

Size: Ø31.5 × 176.5mm

Maximum input spot size: Ø 12mm

Point size: approximately Ø 0.5mm

The output spot shape is circular



Technical characteristics
  • Operating Modes

    Q-Switched & SPT

  • Beam Profile

    Flat-top

  • Wavelengths

    1064 nm / 532 nm

  • Pulse Energy (1064 nm, Q-Switched)

    100–800 mJ single pulse

  • Pulse Energy (532 nm, Q-Switched)

    50–400 mJ single pulse 

  • Pulse Width

    ≤ 6 ns (Q-Switched) · 300 µs (SPT)

  • Spot Size

    2–10 mm

  • Repetition Rate

    Max 10 Hz (1064 nm, 532 nm, SPT)

  • Optical Delivery

    Articulated arm (imported from South Korea)

  • Aiming Beam

    655 nm red diode, adjustable brightness

  • Energy Calibration

    External & self-calibration

  • Cooling

    Air + water + semiconductor cooling

  • Interface

    12″ true-color touchscreen

  • Power Supply

    AC 110 V or 230 V, 50/60 Hz

The Corpoderm package includes:

Training

PIGment comes with a complementary 2-day training to cover in-depth the theory of this technology as well as the practice side of things, including safety guidelines. 

Delivery

Like everything other Corpoderm devices, PIGMent's delivery is included in your price.

Warranty

Corpoderm praises itself in providing state-of-the-art services. With PIGMent comes a 2-year limited warranty, bringing you peace of mind. 

Subscribe to our newsletter